Auxiliary machines

Diesel engines

Diesel engine – 8NVD36
(clockwise rotation) 

  • Consumer load: carried out with adjustable resistor 

Parameter of the plant

  • Power: 294kW
  • Revolution: 500 rpm
  • Bore: 240 mm
  • Hub: 360 mm
  • Mean effective pressure: 5,2 bar
  • Specific fuel consumption: 239 g/kWh

Diesel engine – 4NVD26

  • Two plants similar version are present
  • Consumer load: carried out with water break unit

Parameter of the plant

  • Power: 79 kW 
  • Revolution: 600 respectively 750 rpm 
  • Bore: 180 mm 
  • Hub: 260 mm 
  • Mean effective pressure: 6,1 bar 
  • Specific fuel consumption: 239 g/kWh

Bilge water separator

Parameter of the plant

  • Rate of flow: 1 m³/h
  • Volume: 140 l
  • Alarm: 15 ppm (Typ: OMD 11)

Hydraulic system workstation

  • Work station with typical hydraulic elements
  • can be combined with electric circuits

Parameter of the plant

Gear type pump

  • Power: 2,2 kW
  • Pressure: 64 bar
  • Revolution: 1430 rpm

Oil reservoir

  • Volume: 40 dm³

Pneumatic test station

  • Low-pressure compressor
  • Possible are: SPS/ LOGO controller
  • analogue or digital signal processing

Parameter of the plant

  • Flow rate at 8 bar: 32 d³m/min
  • Revolution: 2900 rpm
  • Final pressure: 8 bar
  • Air receiver: 50 d³m

Pumps test station

  • with 4 Pumps
Pump 1 and 2 (Type: NI 32-160/01)
  • Centrifugal pump
  • Revolution: 2900 rpm
  • Power: 2,5 kW
  • Delivery rate: 16 m³/h
  • Delivery height: 25 m
  • NPSH: 1,6 m
Pump 3 (Type: KSEYK 40-1/004))
  • Side channel pump
  • Revolution: 1450 rpm
  • Power: 1,45 kW
  • Delivery rate: 8 m³/h
  • Delivery height: 25 m
  • Diameter impeller: 142 mm
Pump 4 (Type: W 2,5)
  • Piston pump
  • Cylinder diameter: 120 mm
  • Hub: 105 mm
  • Revolution: 69 rpm
  • Power: 3 kW

Ambient air cabin

Parameter of the plant

  • maximum delivery rate air blower: 2500 m³/h
  • Bore of the piping: 250 mm 
  • Prime mover: 1,1 kW
  • Revolution: 1410 rpm